Technical Info

We are often asked by our customers for advice or suggestions on how to identify certain types of instrument, or what type of instrumentation should be used on a particular application. Whilst it is difficult to answer all questions here, below we have included some basic information convering some of the questions we are commonly asked.

WRAS Approval

Requirements of the Water Supply (Water Fittings) Regulations 1999

Thread Identification
Guidance notes on how to easily identify different gauge threads.
Safety Pattern Gauge Selection
Definition based on The European Standard Fpr Pressure Gauges EN-837 as to when and what type of safety pattern gauge should be used on a particular application.
NACE MR0175
Pressure Gauge According To NACE MR0175 Requirements
Installation & Maintenance of Pressure Gauges
The following is a guide for the installation and maintenance of pressure gauges.
Installation & Maintenance of Mechanical Thermometers
The following is a guide for the installation and maintenance of mecanical thermometers.
Gas Regulator Pressure Gauges
Exchange or Replacement Pressure Gauges For Gas Pressure Regulators
CE Marking On Pressure Gauges

CE Marking On Pressure Gauge / Pressure Equipment Directive

CONTACT US

Ashford Instrumentation Ltd
Unit 3 Fairview Industrial Park
Hamstreet Road
Ruckinge
Kent TN26 2PL

Tel: 01233 730999
Fax: 01233 731133
Email: sales@ashfordinstrumentation.com


Ukas and SGS Certificates

Payments by Mastercard SupportedPayments by Visa Supported
All Major Credit Cards Accepted